Space

Home>Mirror Screen Protectors>Motorola

Motorola Moto X Mirror Screen Protector
Part Number MR-Motorola-Moto-X
review
1 Review(s)
5
  • 1 x Mirror screen protector per pack
  • Designed for Motorola Moto X
  • Free Regular Shipping

  • $15.99 USD
    Was:   $20.99USD
    Availability: In Stock
  • QTY:


Exact Fit

Exact Fit


Our Motorola Moto X screen protectors are cut cut specifically to cover maximum flat surface and not just the screen. Curved screens may require a slightly smaller fit to reduce the chance of bubbling.

Fast Installation

Fast & Easy Installation


Our screen protectors are easy to install and will automatically adhere by static once positioned in place. Please note: they must be applied to a clean surface and any small bubbles will go away within 48 hours.

Scratch Resistant

Scratch Resistant


All of our screen protectors have a special scratch resistant coating that helps protect your devices from everyday wear and tear.

No Sticky Residue

No Sticky Residue


Our Motorola Moto X screen protectors adhere to the screen by static and will not leave a sticky residue once removed.

Mirror Finish

Mirror Finish


Gives your Motorola Moto X screen mirror-like properties when turned off or in standby mode.



Clarivue Mirror screen protectors give your device a trendy look while offering scratch resistant protection for your Motorola Moto X screen. The screen of the device will have a reflective mirror-like property when in standby mode once applied with a mirror screen protector. The screen protector becomes transparent and allows you to view the contents on the screen when the device is turned on. Our mirror screen protectors are also perfect for any women that likes to apply their make-up on the go.

"
Installation Step 1 Step 1.

Clean and remove any dust or dirt on your screen with the specially designed cleaning cloth found inside your package.

Installation Step 2 Step 2.

Peel back the label marked number 1. Try to avoid touching the backing so your screen protector stays clean and fingerprint-free.

Installation Step 3 Step 3.

Align the film to the corner of your screen. Then, while holding it in place, slowly apply the screen protector.

Installation Step 4 Step 4.

Peel back the label marked number 2. As long as there's no dust or dirt underneath, any bubbles should disappear in about 48 hours.

Ultra-Clear
  • Exact fit for your device
  • Smooth finish
  • Custom Orders Available
  • Transparent with no clarity loss
  • Scratch resistance coating
  • Non-adhesive backing & No sticky residue
Anti-Glare
  • Exact fit for your device
  • Anti-Glare, Anti-Finger print
  • Custom Orders Available
  • Scratch resistance coating
  • Non-adhesive backing & No sticky residue
Privacy
  • Exact fit for your device
  • Scratch resistance coating
  • Custom Orders Available
  • Non-adhesive backing & No sticky residue
  • Privacy feature, screen non-visible when viewed from angle
Mirror
  • Exact fit for your device
  • Smooth finish
  • Custom Orders Available
  • Scratch resistance coating
  • Non-adhesive backing & No sticky residue
  • Mirror feature, screen turns to mirror when off
  • - Is the screen protector an exact fit?
  • Yes, all of Clarivue screen protectors are specifically designed to fit each model, there is no cutting or modifying needed. The Screen Protector will be slightly smaller than the actual screen to avoid bubbles.
  • - Will the screen protector move once it is applied on the screen?
  • No, once the screen protector is applied to the screen, it will not slide or move.
  • - How do I remove the screen protector once it is applied?
  • You can remove the screen protector by applying a piece of scotch tape at one of the corners of the screen protector, and then slowly lift the tape along with the screen protector.
  • - How much is shipping and handling?
  • Regular shipping is FREE worldwide on 99% of our products.
    Please find the estimated shipping time below:
Regular Shipping UPS Std Shipping UPS Express Saver
USA FREE (5 to 12 business days) (4 to 7 business days) (2 business days) **
Canada FREE (5 to 12 business days) (4 to 7 business days) (2 business days) **
International FREE (10 to 25 business days)*** (4 to 7 business days)**
  • Note: Processing time is normally 2 to 3 business days.

  • ** UPS cannot deliver to PO boxes. Orders placed before 2pm western time will be shipped out the same day for UPS shipping.
  • *** Free International shipping on most products. Free Shipping not available for Italy.
Customer Reviews
Rating Excellent protector
 
This is without a doubt in my mind the best screen protector system. The mirror finish is not my favorite, but if that's what you want, it is excellent. It truly is a mirror, and looks really high tech. I found it was too reflective in bright daylight for my tastes, so I went for the non-glare one, still from Clarivue. The method used for these protectors is truly superior. They are thin, but hard and perfectly finished. Installation is done without any water. The neat thing is that you can pull up edges or corners and remove dust until the installation is perfect--something I wouldn't do with the soft/wet type protector installs. The trick that makes this work well is to have a few pieces of Scotch tape handy. If there's a bit of dust, shown by a little circle with a dot in the center under good light, you use one piece of tape on the outside to lift the edge or corner nearest the dust spot. Then use a second piece to press the sticky part on the dust spot--it's usually on the screen, rather than the protector, in my experience. The dust comes away on the tape. Then let the protector down again, and gently smooth with a thumb or finger. You can lift up and down repeatedly to get rid of air bubbles, massaging them toward the edge. For me, it took maybe 10 minutes, but it resulted in a perfect install, both for the mirror one and the non-glare one. I saved the mirror one on a flat piece of plastic and I'm sure it would work just like new if I ever want to go back to it. I've never really gotten perfect installs with the wet type protectors--pretty good, but not perfect. Plus, they usually require a day to settle in and for bubbles to go away, and usually there's some orange peel effect left, in the right light. The Clarivue looks much more professional, and is ready to go right away. I like the non-glare (which comes in a 2-pack BTW), but it does have a slight friction effect when swiping. I like the feel, but some may not. It also makes the appearance of a bright picture in a dark room look just a tad grainy. This is to be expected with any non-glare screen. It might take a bit of getting used to for some. I may end up trying the Clarivue clear protector--no mirror, no non-glare. However, I'm liking the non-glare a lot. And if I do try the clear one, I know I can switch back and forth at will. It just takes a little time and tape, but the reusability is a great feature of these protectors.
  Reviewed by:   from lopez island. on 1/2/2014
5/5
Space
Related Products
Motorola Moto X Ultra-Clear Screen Protector
Motorola Moto X Ultra-Clear Screen Protector
$19.99  $9.99
MORE DETAILS
Motorola Moto X Anti-Glare Screen Protector
Motorola Moto X Anti-Glare Screen Protector
$19.99  $9.99
MORE DETAILS
Motorola Moto X 4-Way Privacy Screen Protector
Motorola Moto X 4-Way Privacy Screen Protector
$24.99  $19.99
MORE DETAILS
 
Recently Viewed Items